OIL FILTER: REMOVAL, DISASSEMBLY, ASSEMBLY AND INSTALLATION (CONTINUED)
ASSEMBLY
A Install two bushings (26) and two elbows (25) on adapter (17).
B
Install elbow (7) on adapter (17).
c
Install two springs (24), two washers (23), two new gaskets
(22), two retainers (21), two retaining rings (20), two filter
elements (19), two new gaskets (18) and two center studs (13)
in shells (14).
D Install two shells (14) with filter element assemblies (15) and
two new gaskets (16) on adapter (17) and secure by torquing
two center studs (13) to 40-50 lb-ft.
INSTALLATION
A
Install oil filters (2) on bracket (12) with four screws (8), four
flat washers (11), four new lockwashers (10) and four nuts (9).
B
Connect hose (6) to elbow (7).
C
Connect hoses (4 and 5) and tighten two nuts (3).
D Install two drain plugs (1) in filters (2).
E
Check engine oil level (LO 9-2350-267-12).
TA312764
5-4.5 /(5-4.6 blank)
Chonge 1
TM 9-2350-267-20