2-78
TM 9-2350-267-20
SERVICE AND PARKING BRAKE LINKAGE: ADJUSTMENT (CONTINUED)
B Check to ensure alinement of brake and apply shaft index mark
with release point (7). If linkage alinement is correct, go to step
C. If not dined, adjust the length of rod (6) until they are alined.
C After brake adjustment, loosen locknut (8) on brake pedal lever
stop screw (9). Adjust brake shaft lever stop screw (9) so that
pedal has 3/4-inch free travel. Tighten locknut (8).
TA310437