2-66
Change 4
TM 9-2350-267-20
E
Remove master switch indicator light from socket. Place red mutimeter
lead in center of socket and black lead to ground. Check for voltage. If
voltage is present replace light bulb. If no voltage, repair or replace wire
459L (p 6-89).
ENGINE DOESNT CRANK
ENGINE
All electrical accessories operate.
a If reading is greater than 550 amps, attempt to rotate engine manually.
(1)
(2)
(3)
(4)
Remove access plate (p 9-25).
Pull and hold FUEL SHUTOFF handle.
Using 3/4 in. drive socket and breaker bar placed on bolt of vibration
dampener, rotate engine manually.
If engine does not rotate, notify Support Maintenance. If engine
rotates, replace starter (p 6-13) and verify no faults.
b If reading is less than 350 amps, go to step 2.
c If reading is O, go to step 3.