HAND PUMP ASSEMBLY AND SELECTOR VALVE: DISASSEMBLY AND ASSEMBLY (CONTINUED)
NOTE
H Remove valve (14) from bracket (18) by removing nut (19)
and two washers (20).
Tag all components for identification at installation.
I
Remove elbow (21) from pump (22).
DISASSEMBLY
J
Remove connectors (23 and 24) from selector valve (25).
A Remove gage (1) from connector (2).
K Remove nut (26) and elbow (27) from selector valve (25).
B Remove connector (2), adapter (3) and tube (4) from tee (5).
L
Remove hand pump (22) from bracket (18) by removing two
c
Remove tube (6) from tees (5 and 7).
screws (28), two lockwashers (29) and two nuts (30).
D Remove tee (5), reducer (8), check valve (9), reducer (10),
M Remove selector valve (25) from bracket (18) by removing
elbow (11), tube (12) and elbow (13).
two screws (31) and two lockwashers (32).
E
Remove tee (7) from valve (14).
ASSEMBLY
F
Remove adapter (15) from valve (14).
A Apply pipe sealant (item 57, Appx D) to all male pipe threads.
G Remove nut (16) and handle (17) from valve (14).
B
Reverse disassembly procedures.
TA310778
16-29
TM 9-2350-267-20