ENGINE AUTOMATIC FIRE EXTINGUISHING SYSTEM TEST (VEHICLES 345 AND ABOVE) (CONTINUED)
J
Turn MASTER switch ON.
Turn engine T/A panel
L
Turn MASTER switch OFF. Observe engine T/A panel
Maintenance switch to horizontal position and observe
lights. Green POWER ON lamp will remain lit. If not,
panel lights. Sequence will be the same as in step F except
troubleshoot engine fire detection system (p 2-306.2).
MANUAL, AUTO and yellow FAULT light will not come on.
If it does, troubleshoot engine fire detection system (p 2-
M Turn engine T/A panel Maintenance switch to vertical
306.2).
position. All lights on engine T/A panel will be off.
K Turn SYSTEM TEST/LAMP TEST switch on engine T/A
N Turn engine T/A panel Maintenance switch to horizontal
panel to SYSTEM TEST position. Sequence will be as
follows:
position.
1 T/A LED flickers.
2 PASS TEST light and F/W LED come on for
approximately 6 seconds and then go out.
14-60 .7(14-60.8 blank)
Change 3
TM 9-2350-267-20