AFES MANUAL DISCHARGE SYSTEM: REMOVAL AND INSTALLATION (CONTINUED)
NOTE
Liberally lubricate all internal parts of
actuator assembly before installation.
L
Install actuator assembly (15) in vehicle with four screws
(13) and four new lockwashers (12).
M Install four threaded fittings (2) in actuator assembly (15)
and install cables (10).
N
Loosely secure three cylinder cables (10) to cable block (14)
with nut (5) and new locknut (4) for each cable.
O Loosely secure handle cable assembly (3) to pin (6) by
tightening socket head setscrews (1).
P
Perform AFES actuator assembly cable adjustment
procedure (p 14-55).
Q Install cover (6) on actuator assembly (15) with four screws
(7), four new lockwashers (8) and four flat washers (9).
R
Perform AFES reactivation (p 14-14.5 and 14-14.8).
14-54.5
Change 3
TM 9-2350-267-20