2-48.24
Change 1
TM 9-2350-267-20
STE/lCE (VTM ONLY) TEST NO. 50 ENGINE OIL PRESSURE (ENGINE RUNNING) (CONTINUED)
G
H
I
J
K
L
M
N
O
P
Q
R
Dial test select (10) to 50.
Press test button (11) and hold until display
Release test button.
Check display (12).
12) shows CAL.
1 If display shows between ± 225, proceed to Step J.
2 If display shows less than -225 or more than + 225, refer
to TM 9-4910-571-12&P.
Dial test select (10) to 01.
Press and release test button (11).
Wait for display (12) to read PASS.
Dial test select (10) to 50.
Press and release test button (11).
Start engine. See TM 9-2350-267-10.
NOTE
Two different numbers will flash on display.
Depress accelerator until flashing display (12) shows 1000 rpm.
Check display (12).
Test No. 50 passes if display shows 30-50 psi.
Stop engine. See TM 9-2350-267-10.
TA312660