12.44.2
Change 4
TM 9-2350-267-20
SUPPORT ASSEMBLY, UPPER CROSSMEMBER AND SUPPORT BRACKETS: REMOVAL, DISASSEMBLY, ASSEMBLY AND
A Coat each of eight bearing shafts (7) lightly with lubricating oil (item 35,
Appx D).
B
Install each of eight roller bearings (8) on support assembly (5) with bearing
shaft (7) and two new cotter pins (6).
INSTALLATION
A Slide support assembly (5) onto crossmember (1).
B Install two support brackets (4) on crossmember (1).
C Apply zinc chromate paste (item 46, Appx D) to mounting surfaces of two
brackets (4) and vehicle ceiling.
D Support crossmember (1) and install support brackets (4) using four screws
(2) and four new lockwashers (3).
FOLLOW-ON TASKS:
Install carrier assembly and motor support bracket (p 12-34).