12-22
TM 9-2350-267-20
CENTER SECTION ASSEMBLY SIDE WEAR STRIPS, CHAIN RETURN WEAR STRIP AND BOTTOM WEAR STRIP:
REMOVAL AND INSTALLATION
REMOVAL
A Remove chain assembly (TM 9-2350-267-10).
B Remove five screws (1) from each side wear strip (2). Pry up
and remove wear strips from center section (3).
C Remove four screws (4) and chain return wear strip (5).
D Remove six screws (6) and bottom wear strip (7).
INSTALLATION
A Reverse order of removal procedures.
B Thoroughly clean wear strip mounting surface of section (3) with
solvent (item 19, appx D) and clean, dry rags (item 50, appx
D). Remove all particles.
C Roughen underside surface of wear strips (2). Apply adhesive
(item 4, appx D) to roughened side of wear strips (2) and moun-
ting surface of section (3). Allow to tack dry approximately 5
minutes before installation. Apply sealing compound (item 53,
appx D) to threads of screws (1).
TA310222