OPERATING THE CONVEYOR - Continued
For safety of personnel in area when backing M992 Into
position, always use ground guide(s).
Backing instructions appear on page 2-99.
Back vehicle to ammunition stockpile. If ammunition is to be transferred
from truck bed, back truck to M992, if possible.
Attach ground cable to truck or stockpile. Failure
ground the M992 properly may result in explosion.
Attach ground cable to truck or stockpile.
Activate hydraulic system (p 2-129). Position conveyor switch (2) IN.
Loader must not Place ammunition onto conveyor at
faster rate than it can be removed at inboard end.
Place ammunition onto outboard end section (3). Projectiles should be
placed onto conveyor base-first.
Push ammunition onto conveyor chain. Conveyor will move ammunition to
inboard end section (4).