TM 9-2350-261-34
INSTALL
12.
9.
10.
11.
Install motor (1) in blower plate (2). Secure
with three screws (3), spacers (4), and
grommets (5).
13.
Place fan vane (6) flush with end of motor
shaft. Secure with set screw (7).
14.
Install cover (8) on blower plate (2). Secure
with seven screws (9) and speed nuts (10).
Turn fan vane (6) through combustion tube
15.
opening to make sure fan vane is clear.
FOLLOW-THROUGH STEPS
1. Install coolant heater in carrier
(see your -20).
Place blower assembly (11) on heater (12)
and turn to the right. Secure with four
nuts (13).
Connect blower assembly lead (14) to
terminal strap (15) terminal No. 6.
Place combustion tube assembly (16) on cool-
ant heater (12) and blower assembly (11).
Secure with nut (17).
Install guard (18) on coolant heater (12).
Secure with four screws (19).
END OF TASK
14-61