57. Install hose (1) on shutoff cock (2). Secure
with clamp (3).
58. Install hose (1) on top of sponson. Secure
with five screws (4) and clamps (5).
W A R N I NG
P - D - 6 8 0 is
flammable. Always use in
an open area with good air
flow, away from sparks,
h e a t , o r f l a m e s . W e a r
Do not breathe
vapors. Avoid contact with skin, eyes, and
clothes. If you get dizzy while using
solvent, breathe fresh air and get medical
help. If solvent gets on hands, wash them.
If solvent gets in eyes, flush eyes with
f r e s h w a t e r a n d g e t m e d i c a l h e lp
immediately. Keep fire extinguisher
Clean external pipe threads of elbow (6) and
adapter (7) with dry cleaning solvent.
Apply a thin, even coat of primer and then
sealing compound (Item 70) to cleaned exter-
nal pipe threads of elbow (6) and
adapter (7). Do not apply primer or sealing
compound beyond small end of threads.
Remove existing plug (8) from oil cooler
elbow (9). Discard plug.
Install elbow (6) in elbow (9).
Install adapter (7) in elbow (6).
Install hose (10) on adapter (7). Secure with