TM 9-2350-261-34
58.
59.
60.
61.
Open fuel shutoff valves (1 and 2). Check
62.
for fuel leaks.
Remove two screws (3). Remove panel (4)
63.
from heater control box case (5).
Remove and discard two nuts furnished with 64.
control box case (5). Retain two washers (6)
and screws (7).
65.
Place control box case (5) on bracket (8).
Secure with two new washers (6), retained
screws (7), retained washers (6), and new
nuts (9).
13-8
Place panel (4) in case (5). Secure with two
screws (3).
Connect wiring harness (10) to connector on
control box panel (4).
Install shell (11) and washer (12) on pin
contact of heater control box lead (13).
Connect circuit 400A lead (14) to control box
lead (13).
t