29. Secure converter studs to drive plate with
six new locknuts ( 1). Tighten nuts to 3740
lb-ft (5054 N.m) torque. Use torque
Install engine quick disconnect handle
bracket (3) on transmission. Secure with two
screws (4) and washers (5).
Apply a thin coat of antiseize compound to
cleaned threads of three screws (2).
Install filter bracket (6) with filters on
transmission. Secure with three new key
washers (7) and screws (2).
Connect two differential oil hoses (8) to pipe
to tube elbow (3) and adapter ( 10) on
differential oil filter (11 ).
GO TO NEXT PAGE