TM 9-2350-261-20-4
REPLACE CABLE W124 (M1068 ONLY) -- Continued
0757 00
5.
Install three new tie straps (1) on cables (2).
6.
Install three new tie straps (3) on cables (2).
7.
Install four clamps (4) on cables (2) and secure to weldnuts (5) with screws (6).
8.
Install clamp (7) on cables (2).
9.
Secure clamp (8) and clamp (7) to weldnut (9) with screw (10).
10. Install two clamps (11) on cables (2) and secure to APIU rack (12) with two screws (13), four washers (14), and two
new locknuts (15).
11. Connect cable W124 plug P1 (16) to Data Panel Assembly A12 jack J3 (17).
FOLLOW-THROUGH STEPS
1.
Connect battery ground lead (WP 0294 00).
END OF TASK
0757 00-4