TM 9-2350-261-20-4
REPLACE SINGLE POINT LAN CABLE (W40) (M1068 ONLY) -- Continued
0752 00
INSTALLATION
1.
Install cable W40 (1) in carrier.
2.
Remove dust cap (2) from DC power extension box A8 (3) jack J17 (4).
3.
Connect cable W40 plug (5) to DC power extension box A8 (3) jack J17 (4).
4.
Connect cable W40 plug 2 (6) to single point LAN ground box A15 (7) jack J1 (8).
5.
Secure excess cable slack with new tie strap (9).
FOLLOW-THROUGH STEPS
1.
Connect battery ground lead (WP 0294 00).
2.
Turn MASTER SWITCH to ON (see your -10). Check that electrical system works properly. See TM 11-7010-256-12&P.
3.
Turn MASTER SWITCH to OFF (see your -10).
END OF TASK