TM 9-2350-261-20-4
REPLACE HARNESS W32 (M1068 ONLY)
THIS WORK PACKAGE COVERS:
INITIAL SETUP:
Personnel Required
Maintenance Level
Power-Generation Equipment Repairer 52D10
Unit
Equipment Condition
Tools and Special Tools
Engine stopped (see your -10)
Carrier blocked (see your -10)
Materials/Parts
Disconnect all external power (TM 11-7010-256-12&P)
Tie strap (11)
Battery ground lead disconnected (WP 0294 00)
REMOVAL
1.
Remove screw (1) and clamp (2) from W32 harness (3) and weldnut (4).
2.
Remove three screws (5) and clamps (6) from W32 harness (3) and weldnuts (7).
3.
Remove six tie straps (8) from W32 harness (3). Discard tie straps.
4.
Disconnect W32 harness plug P6 (9) from tent interface panel box A5 jack J7 (10).
Disconnect W32 harness plug P7 (11) from tent interface panel box A5 jack J8 (12).
5.
6.
Disconnect W32 harness plug P8 (13) from tent interface panel box A5 jack J10 (14).
7.
Disconnect W32 harness plug P9 (15) from tent interface panel box A5 jack J9 (16).