REPLACE DC POWER EXTENSION CABLE (W10) (M1068 ONLY)
THIS WORK PACKAGE COVERS:
Power-Generation Equipment Repairer 52D10
Tools and Special Tools
Engine stopped (see your -10)
Carrier blocked (see your -10)
All external power disconnected (TM 11-7010-256-
Tie strap (6)
Battery ground lead disconnected (WP 0294 00)
Disconnect cable W10 plug P14 (1) from power control box A1 jack J34 (2).
Remove screw and loop clamp (3).
Remove and discard six tie straps (4).
Remove three screws and loop clamps (5).
Disconnect cable W10 plug P1 (6) from DC power extension box A9 jack J1 (7).
Remove cable W10 from carrier.