TM 9-2350-261-20-4
REPLACE SMOKE GENERATOR GLOW PLUG CABLE ASSEMBLIES
0714 00
(M1059 ONLY) -- Continued
NOTE
There are seven clamps that bolt interior cable to hull. One is used on the right side of carrier
and six on the left. All are installed the same way. Only one clamp is shown. Install as required.
7.
Install interior cable (1), six clamps (9), screws (10), and new lockwashers (11) to hull.
8.
Install interior cable (1), clamp (9), screw (10), and new lockwasher (11) to hull.
9.
Connect interior cable (1) to jack 1J6 (12) on back of control panel (13).
FOLLOW-THROUGH STEPS
1.
2.
3.
Connect battery ground lead (WP 0294 00).
4.
Set circuit breaker CB1 to ON. See TM 3-1040-283-10.
END OF TASK
0714 00-5/6 blank