TM 9-2350-261-20-4
REPLACE M8A3 NBC CABLES, SWITCH ASSEMBLY, AND BRACKETS
0676 00
(M577A2 ONLY) -- Continued
INSTALLATION
1.
Install lead (10) and circuit lead 10 (9) to connector (8).
2.
Install cable (1) in connector (8).
3.
Route cable (1) along adjacent wiring harness. Secure with five new tie straps (7).
4.
Install three clamps (6) on cable (1). Secure clamps to driver's rear bulkhead with three screws (4) and new lockwashers
(5).
5.
If damaged, install new grommet (2) on cable (1). Route cable through panel (3) and insert grommet.