TM 9-2350-261-20-2
ADJUST UPPER ACCELERATOR
PEDAL TOE STOP
29.
30.
31.
32.
Remove screw (1), nut (2), and throttle link
(3) from outer transfer shaft (4).
33.
Depress upper accelerator pedal (5) until
transmission arm (6) is in full open position. 34.
Adjust toe stop screw (7) in floor bracket (8)
to 1/16 inch (2 mm) space between upper
accelerator pedal (5) and screw.
Install throttle link (3) on outer transfer
shaft (4). Secure with screw (1) and
nut (2).
Adjust detent plunger if necessary
(page 23-40).
Check operation of accelerator controls and
transmission shift points (page 23-40).
GO TO NEXT PAGE
Change 1
23-39