TM 9-2350-261-20-2
INSTALL
5. Clean threads of 14 screws (1) with dry
cleaning solvent.
6. Apply light coat of antiseize compound to
threads of 14 screws (1).
7. Place new gasket (2) and new differential
cover (3) on differential gearbox (4).
8. Secure differential cover (3) in place with 14
new key washers (5) and screws (1). Tighten
screws to 252-300 lb-in (29-34 N-m) torque.
Bend tabs on key washers.
9. Install dipstick (6) through differential
cover (3).
FOLLOW-THROUGH STEPS
1. Check oil level in differential gearbox. See
2. Close front power plant engine access door.
your LO.
See your -10.
END OF TASK
21-24
Change 4