TM 9-2350-261-20-2
R E P L A C E F I N A L D R I V E F I L L E R T U B E A N D D I P S T I C K
DESCRIPTION
This task covers:
Remove (page 20-12).
Clean, Inspect, and Replace (page 20-12).
Install (page 20-13).
I N I T I A L S E T UP
Tools:
References:
General Mechanics Tool Kit (Item 30, App D)
See your 10
Materials/Parts:
Equipment Conditions:
Antiseize compound (Item 4, App C)
Trim vane lowered (see your -10)
Sealing compound (Item 46, App C)
Power plant front access door open
Key washer
(see your 10)
Preformed packing
Final drive removed (page 20-9)
Personnel Required:
Unit Mechanic
R E M O V E
1.
2.
Turn dipstick (1) to the left and remove from
oil filler tube (2).
Remove screw (3), key washer (4), and clamp
(5) from final drive (6). Discard key washer.
3.
4.
5.
6.
7.
Remove nut (7) from elbow (8).
Remove vent tube (9) from elbow (10).
Remove filler tube (2) and vent tube (9) from
final drive (6).
Remove elbow (10) from final drive (6).
Loosen nut (11). Remove elbow (8) and
preformed packing (12) from final drive (6).
Discard packing.
C L E A N , I N S P E C T , A N D R E P L A C E
8. Check parts and housing for cracks,
damage, and wear. Replace as needed.
20-12