TM 9-2350-261-202
REPLACE OIL COOLER TO TRANSMISSION HOSE AND
F I T T I N G S
DESCRIPTION
This task covers:
Remove (page 18-4).
Clean, Inspect, and Replace (page 18-5).
Install (page 18-5).
INITIAL SETUP
Tools:
Personnel Required:
General Mechanics Tool Kit (Item 30, App D)
Unit Mechanic
Adjustable Wrench (Item 80, App D)
References:
Materials/Parts:
See your -10
Dry cleaning solvent (Item 13, App C)
See your LO
Sealing compound (Item 51, App C)
Wiping rag (Item 61, App C)
Equipment Conditions:
Key washer
Power plant removed (page 5-11)
Preformed patting
Self-locking nut
Suitable container
REMOVE
1. Remove screw (1), key washer (2), two
clamps (3) and hoses (4 and 5) from
2.
3.
4.
5.
6.
7
transmission (6). Discard key washer.
Remove screw (7), locknut (8), clamp (9), and
two hoses (4 and 5) from
bracket (10). Discard locknut.
Disconnect hose (5) from elbow (11). Place
hose through hull access opening. Drain oil
from cooler into a container.
Disconnect hose (5) from elbow (11).
Loosen jamnut (13) and remove elbow (12).
from transmission (6). Use adjustable wrench.
Remove valve (14) from elbow (12).
Remove preformed packing (15) from
elbow (12). Discard packing.
18-4