TM 9-2350-261-20-2
R E P L A C E R A D I A C W I R E H A R N E S S
(M113A2, M577A2, M1068, AND M741A1 ONLY)
INITIAL SETUP
Tools:
References:
General Mechanics Tool Kit (Item 30, App D)
See your -10
Materials/Parts:
Equipment Conditions:
12 ft Cord
Engine Stopped/shutdown (see your -10)
Battery ground lead disconnected (page 13-2)
Personnel Required:
Unit Mechanic
REMOVE
1.
2.
3.
4.
Remove four clips (1) and RADIAC harness
(2) from four cradles (3).
Remove electrical connector(s) (4) from end of
harness (2) (page 14-3).
Tie 12-foot (3.7 m) cord to harness (2).
Pull harness (2) and cord through channel.
Untie cord from harness (2), leaving cord in
channel.
INSTALL
5.
6.
7.
Tie cord to end of wiring harness (2).
Pull cord and harness (2) through channel.
Remove cord.
Install connector(s) (4) on harness (2)
(page 14-3).
8. Place harness (2) on four cradles (3) and se-
cure with four clips (1).
FOLLOW-THROUGH STEPS
1. Connect battery ground lead (page 13-2).
END OF TASK
Change 3
17-13