TM 9-2350-261-20-2
11. Coat tops of four battery terminal lugs (1)
with grease.
12. Slide battery cover (2) onto three grommets
(3) on battery box (4). Secure cover to bat-
tery box with two latches (5) on side of box.
FOLLOW-THROUGH STEPS
1. Turn MASTER SWITCH ON. Check
2.
BATT-GEN gage on instrument panel. Gage
should read in BATT green or yellow zone
(see your -10).
3.
Start engine. Raise and lock ramp
(see your -10).
Stop/shutdown engine (see your -10).
END OF TASK
13-5