TM 9-2350-261-20-2
95. Install rear main wiring harness (1), circuit
90 lead (2), and two washers (3) on two
weldnuts (4). Secure with two screws (5)
and clamps (6).
96. Connect circuits 21, 22, 23, and 24 leads (7,
8, 9, and 10) to trailer wiring harness (11).
97. Connect circuit 451 lead (12) to rear bilge
pump (13).
98. Install wiring harness (1) on bilge tube
clamp (14). Secure with clamp (15), screw
(16), and nut (17).
99. Route circuits 38, 23, and 24 leads (18,
19, and 20) through clamp (21). Secure
clamp (21) to tail light (22) with washer
(23) and nut (24).
100. Connect circuits 23 and 24 leads (19 and
20) to right tail light (22) female
connectors.
GO TO NEXT PAGE
12-129