35.
36.
37.
38.
Remove two clips
from cradle (3).
(1) and circuit 48 lead (2)
39. Remove two clips (12)
from cradles (14).
TM 9-2350-261-20-2
and harness (13)
Lower left crew seat backrest. Turn
40. Disconnect circuit 38 lead (15) from dome
handle (4) clockwise and pull battery
drawer (5) out.
Remove nut (6), screw (7), and circuit 6
and 48 leads (8 and 2) from battery
terminal (9).
Remove circuit 48 lead (2) from
grommet (10) in battery box (11). Discard
grommet.
light (16).
N O T E
If needed, remove personnel heater for
access.
41. Remove three screws (17), lockwashers (18),
clamps (19), and circuit 38 lead (15) from
three weldnuts (20). Discard lockwashers.
42. Attach twine (21) to circuit 38 lead (15).
Pull lead through transverse beam (22) into
drivers compartment. Remove twine from
lead and leave it in transverse beam.
GO TO NEXT PAGE
Change 2
12-118.7