40.
41.
42.
Remove two nuts (1), mounts (2 and 3), flat 43.
washers (41, and screws (5) that secure
instrument panel (6) to two struts (7).
44.
Support panel (6). Remove two screws (8),
flat washers (9), one lockwasher (10), and
ground lead (11) from two mounts (12) and
45.
upper support (13). Discard lockwasher.
Support panel (6) on two struts (7) to gain
46.
access to rear of instrument panel.
47.
TM 9-2350-261-20-2
Disconnect circuit 28 lead (14) from fuel
gage.
Disconnect circuit 451B lead (15) from rear
bilge pump ON indicator light.
Disconnect circuit 38 lead (16) from instru-
ment panel wiring harness.
Disconnect circuits 450, 450B, and 451A
leads (17, 18, and 19) from BiIge pump
switch.
Disconnect circuits 21, 22, 23, and 24 leads
(20, 21, 22, and 23) from front main wiring
harness.
GO TO NEXT PAGE
12-111