TM 9-2350-261-20-1
R E P L A C E A I R C L E A N E R C O V E R
INITIAL SETUP
Tools:
General Mechanics Tool Kit (Item 30, App D)
Materials/Parts
Sealing compound (Item 46, App C)
Personnel Required:
Unit Mechanic
References:
see your -10
Equipment Conditions:
Engine stopped/shutdown (see your -10)
Drivers power plant access panel removed
(page 24-25)
Trim vane lowered (see your -10)
Power plant front access door open
(see your -10)
Carrier blocked (see your -10)
Air cleaner element and housing removed
(page 7-7)
Air cleaner hoses removed (page 7-3)
REMOVE
1.
2.
3.
Remove four screws (1), eight washers (2),
and air cleaner (3) from two brackets (4).
Disconnect air restriction indicator hose (5)
from adapter (6).
Remove adapter (6) and elbow (7) from air
cleaner cover (3).
INSTALL
4.
5.
6.
7.
Apply a thin coat of sealing compound to ex-
ternal threads of adapter (6) and elbow (7).
Install elbow (7) in air cleaner cover (3) and
adapter (6) in elbow.
Connect air restriction hose (5) to
adapter (6).
Place air cleaner cover (3) on two brackets
(4) and secure with four screws (1) and eight
washers (2).
GO TO NEXT PAGE
7-5