TM 9-2350-261-20-1
INSTALL
9.
6.
7.
8.
Install sealing compound to cleaned external
threads of fittings.
10.
Install two elbows (1) in filter assembly (2).
11.
Secure filter assembly (2) to bracket (3) with
two screws (4) and nuts (5).
12.
Connect two fuel supply hoses (6 and 7) to
two elbows (1).
Close drain valve (8) and fill filter assembly
(2) with fuel.
Install bleed plug (9) in filter assembly (2).
Connect supply hose at quick disconnect
coupling (10).
.
FOLLOW-THROUGH STEPS
1. Connect battery ground lead (page 13-2).
4. Raise and lock ramp (see your -10).
2. Start engine (see your -10).
5. Stop/shutdown engine (see your -10).
3. Check for leaks. Install power plant rear
access panel (page 24-27 or 24-29).
END OF TASK
6-124