TM 9-2350-261-20-1
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
Apply a thin even coat of sealing compound
to clean external threads of fittings before
installation.
Install two hoses (1), and lower filler neck
(2) with a new gasket (3) and filler tube (4)
on filler flange (5). Secure with four
clamps (6).
Install clamp (7) and ground lead (8) on
filler tube (4). Secure with screw (9), washer
(10), and nut (11).
Install flange (12), insert (13), and filler
neck screen (14) in hull.
Install flange (15), lower filler neck (2), and
new gasket (3) on hull top opening. Secure
with 12 screws (16) and nuts (17).
Install two elbows (18)
neck (2).
Install two elbows (19)
neck (2).
Connect fuel tank vent
in lower filler
in lower filler
tube (20) and fuel
return tube (21) to two eIbows (19).
Connect two fuel tank vent hoses (22) to
two elbows (18).
Fill fuel tank (see your -10).
Check filler tube and hoses for leaks.
FOLLOW-THROUGH STEPS
1. Install filler cap (page 6-8).
4. Raise and lock ramp (see your -10).
2. Install filler cover and lock (page 6-7).
5. Stop/shutdown engine (see your -10).
3. Connect battery ground lead (page 13-2).
END OF TASK
I N S T A L L
6-53