TM 9-2350-261-20-1
REPLACE FUEL TANKS (M981 AND M1064 ONLY)
DESCRIPTION
This task covers:
Remove (page 6-34).
Install (page 6-36).
INITIAL SETUP
Tools
General Mechanics Tool kit (Item 30, App D)
Angle Lifting Bracket (Item 15, App D)
Socket Wrench Set (Item 90, App D)
Torque Wrench (Item 98, App D)
Suitable Lifting Device
Materials/Parts:
Caulking compound (Item 8, App C)
Molybdenum D grease (Item 30, App C)
Sealing compound Primer (Item 43, App C)
Sealing compound (Item 46, App C)
Sealing compound (Item 50, App C)
Sealing compound (Item 52, App C)
Wiping rag (Item 61, App C)
Gasket
Lockwasher (5)
Set screw (4)
Personnel Required:
Unit Mechanic
Personnel Required: (cont):
Helper (H)
References:
See your -10
Equipment Conditions:
Engine shutdown (see your 10)
Carrier blocked (see your 10)
Ramp lowered (see your -10)
Battery ground lead disconnected (page 13-2).
Fuel tanks drained (page 6-28)
Filler covers and locks removed (page 6-29)
Filler caps and strainers removed (page 6-30)
Fuel tank access covers removed (page 6-31)
Fuel quantity transmitter removed
(page 6-32)
Cable reel holder assembly removed
(page 41-7)
Tail lights and guards removed (page 12-57)
Track shrouds removed (page 22-2)
REMOVE
1.
WARNING
Fuel flowing over a metal
surface
causes
static
electricity. This will cause a
spark unless the surface is
grounded.
NOTE
Pipes are removed from both fuel tanks
the same way. Use wiping rag to wipe up
any spilled fuel.
Unscrew pipe (1) from fuel tank (2).
6-34
Change 2