TM 9-2350-261-20-1
1. Replace cable W3
(page 40.1-58).
2. Verify no faults found.
1.
2.
3.
Remove cable W3 plug P1 (1) from jack J1 (2) on Power
Distribution Box (3) and plug P3 (4) from jack J24 (5)
on Power Control Enclosure (6).
Measure resistance between plug P1 (1) and plug
P3 (4) as follows:
P1 pin A to P3 socket A
P1 pin B to P3 socket B
PI pin C to P3 socket C
Does multimeter read 0 ohms for each reading?
1. Faulty Power Control Enclosure.
2. Notify your Supervisor.
Change 3
3-226.79