TM 9-2350-261-20-1
1. Is external source read between 103 and 135 vac?
1. Apply a new source of exter-
nal AC power.
1. Apply external source of AC power to SICPS vehicle
(TM 11-7010-256-12&P).
2. Remove cable W1 leads (1) from generator (2), if
applicable.
3. Remove cable W2, J1 (3) from Power Entry Box (4).
4. Measure resistance between W1 leads and W2 plug J1
as follows:
W1 HOT to J1 pin A
W1 NEU to J1 pin N
W1 GND1 to J1 pin G1
W1 GND2 to J1 pin G2
5. Does multimeter read 0 ohms for all readings?
2. Verify no faults found.
1. Replace cable W1/2
(see TM 11-7010-256-12&P).
2. Verify no faults found.
G O T O N E X T P A GE
Change 3
3-226.77