TM 9-2350-261-20-1
1. Turn all power OFF,
(see your -10 and TM 11-7010-256-12&P).
2. Remove cable W32, plug P6 (1) from Tent Interface
Panel jack J7 (2).
3. Measure resistance between pins on P6 (1) and P15 (3)
of cable W32 as follows:
P6 pin C to P15 pin A
P6 pin D to P15 pin B
P6 pin E to P15 pin C
4. Does multimeter read 0 ohms for each set of measure-
ments?
1. Faulty Tent Interface Panel.
2. Notify your supervisor.
1. Replace cable W32
(page 40.1-78).
2. Verify no faults found.
3-226.16
Change 3