TM 9-2350-261-20-1
1. Turn MASTER SWITCH to OFF.
2. Remove eight nuts (1), washers (2), and screws (3)
from master switch panel (4). Pull panel away
from distribution box (5).
3. Remove circuit 10 plugs (6) from circuit breaker
jacks (7).
4. Measure resistance between circuit breaker
jacks (7).
5. Does multimeter read 0 ohms?
1. Repair circuit 10 lead assembly from the circuit
breaker to the front dome light switch.
2. Verify no faults found.
1. Replace circuit breaker
(page 12-70).
2. Verify no faults found.
1. Adjust the ramp door
switch (page 12-75.
2. Verify no faults found.
1. Replace ramp door switch (page 12-74).
2. Verify no faults found.
3-119
1. Has the ramp door switch been adjusted?