TM 9-2350-261-20-1
1. Turn MASTER SWITCH to OFF.
2. Install jumper wire between right headlight wiring
harness circuit 25 plug (1) and ground.
3. Remove right headlight wiring harness plug (2)
from front main harness (3) at carrier bulkhead.
4. Measure resistance between right headlight wiring
harness plug (2) pin A (4) and ground.
5. Does multimeter read O ohms?
1. Remove jumper wire.
2. Repair right headlight wir-
ing harness circuit 25
(page 14-3).
3. Verify no faults found.
3-104