REPLACE ENGINE (M548A1) Continued
Use a lifting device of at least 2,000 lb (908 kg) capacity and sling (1) to lift new engine from shipping container. Block
rear end of engine on level ground (see your -20).
Parts installed in Steps 2 - 59 are not supplied with new engine. These parts must be retained
from the old engine.
Apply a thin coat of antiseize compound to cleaned threads of two screws (2).
Install base (5), rubber engine mount (6), and cap (4) on support (7). Secure with two screws (2) and new key
washers (3). Tighten screws to 360-420 lb-in (41-47 Nm) torque.
Block front of engine mount (see your -20) with wood blocks.