TM 9-2350-247-34
INSTALL TURN SIGNAL KIT Continued
0076 00
NOTE
Both left and right sides of marker and turn signal lights install the same way. Left side is
shown.
30. Install retained marker light (12) on bracket (13) with one new lock washer (14), one retained washer (15), and retained
nut (16).
31. Install turn signal lamp (17) on bracket (13) with stud (18), two washers (19), and nut (20).
32. Apply caulking compound around bracket mounting holes. Place bracket (13) on hull. Secure with two screws (21), four
washers (22), and two nuts (23).
33. Connect left marker light to circuit 20 lead (see your -20).
0076 00-14