TM 9-2350-247-34
REPLACE ENGINE (M548A1) Continued
0007 00
28. Remove lock nut (11) and screw (12) from bracket assembly (13). Discard lock nut.
29. Before removing screw (14), raise inner transfer shaft (15) high enough to tilt the outer transfer shaft (16).
30. Remove screw (14) and lock washer (17) from bracket assembly (13). Discard lock washer.
31. Remove two screws (18), lock washers (19), nuts (20), and bracket assembly (13) from power plant. Discard lock
washers.
0007 00-14