TM 9-2350-247-34
REPLACE DIODE AND MOTOR RESISTOR Continued
0071 00
INSTALLATION
1.
Install motor resistor (1) on bracket (2) with screw (3) and nut (4).
2.
Secure motor resistor (1) leads to terminals No. 4 and No. 6 of terminal board (5).
3.
Install diode (6) in holder (7).
4.
Install guard (8) on heater (9). Secure with four screws (10).
FOLLOW-THROUGH STEPS
1.
Install engine coolant heater in carrier (see your -20).
END OF TASK
0071 00-3/4 blank