REPLACE FUEL CONTROL VALVE Continued
Repeat Steps 4 - 7 with shutoff solenoid side only of fuel control valve energized with 24 Vdc.
Graduated cylinder should now contain 0.52 ±.12 cubic inches (8.5 ± 2 milliliters) of fuel.
10. If fuel flow rates are not within limits, adjust flow. Turn adjusting screw to right to increase and to left to decrease.
Adjust high heat flow first, then low heat flow.
11. After fuel flow is adjusted within limits, seal adjusting screw with insulating varnish.
12. If fuel flow cannot be adjusted within limits, replace fuel control valve.