TM 9-2350-247-34
INSTALL ENGINE COOLANT HEATER KIT (M548A1) Continued
0061 00
FOLLOW-THROUGH STEPS
1.
Fill cooling system (see your -20).
2.
Install batteries (see your -20).
3.
Start and operate heater on both high and low heat (see your -10). Check operation of heater and inspect for fuel and
coolant leaks. If leaks are found, tighten connections. Turn heater off.
4.
Install throttle floor plate (see your -20).
5.
Install cab left floor plate (see your -20).
6.
Lower cab center floor plate (see your -10).
7.
Lower cab personnel center seat (see your -10).
8.
Install top left access grille (see your -10).
END OF TASK
0061 00-17/18 blank