TM 9-2350-247-34
REPLACE ENGINE (M548A1) Continued
0007 00
REMOVAL
CAUTION
Cap or cover openings where fuel, oil, coolant, or hydraulic lines or fittings have been removed.
NOTE
Installation Steps 2 - 59 will tell what parts must be retained during removal, so they may be
reinstalled on the new engine.
1.
Disconnect clamp (1) and coolant tube (2) from deaeration elbow (3). Remove from engine.
2.
Remove two screws (4) and key washers (5) from thermostat housing cover (6). Remove deaeration elbow (3) with
hose (7), clamp (8), elbow (9), and gasket (10) from cover (6). Discard key washers and gasket.
3.
Remove two screws (1), key washers (2), oil cooler elbow (3), and gasket (4) from engine. Discard key washers and
gasket.
0007 00-2