REPLACE/FABRICATE CARGO COVER HEAT SHIELD Continued
Mark location of heat shield (1) on left outer side of cargo cover as shown.
Position heat shield on outside of cargo cover, and mark locations for four 1/4 inch (6.4 mm) holes, using shield as
template. Remove shield.
Cut four 1/4 inch (6.4 mm) holes in cargo cover.
Install one large washer under each screw head and one at each location between the cover and
Position heat shield (1) on outside of cargo cover (2), and secure with four screws (3), eight large washers (4), four
washers (5), and four lock nuts (6).
END OF TASK
0060 00-3/4 blank