INSTALL CARGO COVER/INSULATION KIT (SECONDARY KIT) Continued
Install two tubes (8) between covers (5) and backrest cushion straps to secure covers at midpoints.
10. Pull two covers tight and secure to six tiedown eyes (9) with six cover straps (10).
11. Position front cover (11), center cover (12), and rear cover (13) in cargo compartment, and secure with eight cover
washers (14) and cover screws (15).
12. Position two outer insulation panels (16) and two center insulation panels (17) on cargo door (18). Position bottom edges
of all panels 14-5/8 inches (37.15 cm) from bottom of cargo door, inside edge of panels (17) 2-9/16 inches (6.51 cm)
from centerline of door, and inside edges of panels (16) 3-1/4 inches (8.26 cm) from outside edges of panels (17). Panels
must clear rifle racks and edge of door opening. Trim panels to fit if required.