TM 9-2350-247-34
INSTALL VEHICLE COMPARTMENT CAB COVER/INSULATION KIT (SECONDARY KIT)
Continued
0057 00
20. Clean end surface of windshield frame for two pads (1) with cleaning compound. Dry surface with clean cloth or
compressed air and coat mounting surface of pads with adhesive. Allow adhesive to dry until tacky and mount pads
firmly on frame.
21. Install front seal (2), rear seal (3), two rear corner seals (4), and fiberglass cover (5) with 16 screws (6), flat washers (7),
large spacer (8), 15 spacers (9), 16 grommets (10), flat washers (11), and nuts (12).
0057 00-9