TM 9-2350-247-34
INSTALL VEHICLE COMPARTMENT CAB COVER/INSULATION KIT (SECONDARY KIT)
Continued
0057 00
5.
Drill eight 13/16 inch (20.6 mm) diameter holes in transverse beam (3) and right personnel seat backrest support (4).
6.
Cut one 1-1/2 inch (3.8 cm) diameter hole in hull behind second hole (drilled in Step 5 above) from right side of carrier.
7.
Install right seat panel (see your -20).
8.
Install personnel seat and backrest cushions (see your -20).
0057 00-4