TM 9-2350-247-34
INSTALL VEHICLE COMPARTMENT HEATER KIT II OR III (M548A1) Continued
0056 00
FOLLOW-THROUGH STEPS
1.
Connect battery negative lead (see your -20).
2.
Start heater (see your -10). Check for fuel or exhaust leaks and proper operation of heater, fuel pump, control box, and
manifold or regulator. Turn heater off.
3.
Close power plant upper rear access door (see your -10).
4.
Install top left access grille (see your -10).
5.
Install bulkhead protector, if material handling kit is installed (see your -20).
END OF TASK
0056 00-23/24 blank